Owen submachine gun
| Owen Gun | |
|---|---|
.jpg) Australian soldiers armed with Owen Guns in New Britain in 1945 |
|
| Type | Submachine gun |
| Place of origin |  Australia |
| Service history | |
| Used by | See Users |
| Wars | World War II, Malayan Emergency, Korean War, Vietnam War |
| Production history | |
| Designed | 1939 |
| Number built | 50,000 |
| Specifications | |
| Weight | 4.21 kg (9.37 lb) |
| Length | 806 mm (32 in) |
| Barrel length | 247 mm (9.75 in) |
|
|
|
| Cartridge | 9x19mm Parabellum |
| Action | Blowback |
| Rate of fire | 700 round/min |
| Muzzle velocity | 420 m/s (1250 ft/s) |
| Feed system | 32 round detachable magazine |
The Owen Gun, which was known officially as the Owen Machine Carbine, was an Australian submachine gun designed by Evelyn (Evo) Owen in 1939. The Owen was the only Australian-designed service firearm of World War II and was the main submachine gun used by the Australian Army during the war.
Contents |
History
Owen, an inventor from Wollongong, was 24 in July 1939 when he demonstrated his prototype .22 calibre "Machine Carbine" to Australian Army ordnance officers at Victoria Barracks in Sydney. The gun was rejected because the army, at the time, did not recognize the value of submachine guns. Following the outbreak of war, Owen joined the army as a private.
In September 1940, the manager of Lysaght’s Works at Port Kembla Vincent Wardell discovered a machine gun in a sugar bag next to his garage when he returned home from work. He showed it to his neighbour, Evelyn’s father who “exploded” at his son’s carelessness and explained the story so far. Wardell became intrigued by the weapon's simplicity and arranged to have Owen transferred to the Army Inventions Board, where he re-commenced work on the gun. The army continued to view the weapon in a negative light, but the government took an increasingly favourable view.
The prototype was equipped with a top-mounted drum magazine, which later gave way to a top-mounted straight magazine.
The choice of caliber took some time to be settled. As large quantities of .45 ACP cartridges were available, it was decided to adopt it for the Owen Gun. Official trials were organized, and Lysaght made three versions in 9 mm, .38-200 and .45 ACP. Sten and Thompson submachine guns were used as benchmarks. As part of the testing, all of the guns were immersed in mud and covered with sand to simulate the harshest environments in which they would be used. The Owen was the only gun that still operated after the treatment. Although the test showed the Owen's capability, the army could not decide on a calibre, and it was only after intervention from the higher levels of government that the army ordered the 9 mm variant.This was very important to the Australian Army.
During the gun's life, its reliability earned it the nickname "Digger's Darling" by Australian troops and it was rumoured to be highly favoured by American troops.
Production and use
The Owen went into production at the John Lysaght factory at Port Kembla and Newcastle. Between March 1942 and February 1943, Lysaght produced 28,000 Owen Guns. However, the initial batch of ammunition turned out to be the wrong type and 10,000 of the guns could not be supplied with ammunition. Once again government intervention overrode military bureaucracy, and took the ammunition through the final production stages, and into the hands of Australian troops at that time fighting Japanese forces in New Guinea. Approximately 50,000 Owens were produced from 1941 to 1945.
Although it was somewhat bulky, the Owen became very popular with soldiers because of its reliability. It was so successful that it was also ordered by the United States and New Zealand.
The Owen was later used by Australian troops in the Korean and Vietnam Wars,[1] particularly the scouts in an infantry section. It remained a standard weapon of the Australian Army until the mid-1960s, when it was replaced by the F1 submachine gun and the AR-15. It was also used in Malaya by British troops, the gun was among its favourites for jungle fighting.
Design
The Owen has a simple blowback design, firing from an open bolt. It is easily recognisable, owing to its unconventional appearance, including the top-mounted magazine, and the side-mounted sight required to allow the firer to aim past it. The placement of the magazine allows gravity to assist the magazine spring in pushing cartridges down to the breech, which improves feeding reliability. Another unusual feature is the separate compartment inside the receiver, which isolates the small-diameter bolt from its retracting handle by means of a small bulkhead. This prevents dirt and mud from jamming the bolt, and makes the Owen a highly reliable weapon. Like the Sten, the Owen had a non-folding wire buttstock, but also had pistol grips.
To facilitate cleaning, the ejector is built into the magazine, rather than the body of the gun. This allows the barrel to be removed rapidly, by pulling up a spring-loaded plunger in front of the magazine housing. After removing the barrel, the bolt and return spring are removed in a forward direction, completely dismantling the gun.
Photographic evidence indicates a horseshoe-shaped 72-round magazine was fielded, but little information exists as to the specifics of this variant.[2][3]
Users
References
- ↑ http://www.kokodahistorical.com.au/index.php?/Owen-Gun.html
- ↑ http://www.diggerhistory.info/pages-weapons/omc.htm
- ↑ http://www.brengun.copperstream.co.uk/owen1.jpg
- ↑ Scarlata, Paul (April 20, 2009). "Small Arms of the Koninlijk Nederlands-Indisch Leger, Part 2". Shotgun News.
External links
- Owen machine carbine / submachine gun
- Machine Carbine, 9 mm Owen, Mark 1
- Owen Gun History
- The Owen Gun, by. James O. Bardwell
|
|||||||||||||||||